Description
(adsbygoogle = window.adsbygoogle || []).push({});
The Perkins 4006D-E23TA and 4008D-E30TA engines are diesel engines designed for industrial use. Here is a brief description of the engines:
- Perkins 4006D-E23TA Engine: The Perkins 4006D-E23TA is a six-cylinder diesel engine that has a maximum power output of 830 hp at 1500 rpm. The engine has a displacement of 23.6 liters and is turbocharged and air-to-air charge cooled. The engine is designed to meet Stage IIIA/Tier 3 emissions regulations and is equipped with an electronic control system. The engine is suitable for use in a variety of applications, including power generation, marine, and industrial.
- Perkins 4008D-E30TA Engine: The Perkins 4008D-E30TA is an eight-cylinder diesel engine that has a maximum power output of 1200 hp at 1500 rpm. The engine has a displacement of 30.6 liters and is also turbocharged and air-to-air charge cooled. Like the 4006D-E23TA, the 4008D-E30TA is designed to meet Stage IIIA/Tier 3 emissions regulations and is equipped with an electronic control system. This engine is also suitable for use in a variety of applications, including power generation, marine, and industrial.
The workshop manual for these engines typically includes information on the engine’s specifications, maintenance procedures, troubleshooting, and repair instructions. This information can be useful for technicians and mechanics who work with these engines on a regular basis.
The Perkins 4000 Series (4006-23, 4008-30, 4012-46 & 4016-61 Diesel and TRS / TESI Spark-Ignited Gas Engines) represents Perkins’ flagship high-horsepower prime and standby power generation engine family, spanning 23.0 liters to 61.1 liters (750 kVA to 2,500 kVA). Featuring individual 4-valve cast-iron cylinder heads, wet replaceable cylinder liners, and Heinzmann / Woodward electronic governing, this official manual provides complete overhaul, valve clearance, and torque specifications.
1. Perkins 4000 Series (4006 / 4008 / 4012 / 4016) Technical & Torque Specifications
| Engineering Parameter | Perkins 4000 Series Factory Specification |
|---|---|
| Engine Configurations Covered | Inline 6 (4006-23L), Inline 8 (4008-30.6L), 60° V12 (4012-45.8L), 60° V16 (4016-61.1L) |
| Common Bore x Stroke | 160.0 mm Bore x 190.0 mm Stroke (6.30 in. x 7.48 in.) — 3.82 Liters per Cylinder |
| Individual Cylinder Head Stud Torque | Stage 1: 100 Nm • Stage 2: 200 Nm • Stage 3: 440 Nm (325 ft-lbs) lubricated with Molycote paste |
| Connecting Rod Big-End Bolt Torque | 4-Bolt Conrod: 160 Nm (118 ft-lbs) / 2-Bolt Serrated Conrod: 375 Nm (277 ft-lbs) |
| Main Bearing Cap Stud Torque | Vertical Main Studs: 570 Nm (420 ft-lbs) • Side Cross-Bolts: 265 Nm (195 ft-lbs) |
| Valve Lash Clearance (Cold) | Intake Valves: 0.40 mm (0.016 in.) Cold • Exhaust Valves: 0.40 mm (0.016 in.) Cold (Check bridge balance first) |
| Cylinder Liner Standout / Protrusion | 0.05 to 0.10 mm (0.002 to 0.004 in.) above cylinder block top deck |
Size your generator load cables and convert tightening torques using our free Interactive Heavy Diesel & Generator Calculators →











Reviews
There are no reviews yet.