Description
(adsbygoogle = window.adsbygoogle || []).push({});
This comprehensive Perkins 2500 Series (2506-15, 2506D-E15TA, 2506F-E15TA, 2506J-E15TA) Workshop Service Manual delivers full factory rebuild guidelines, electronic MEUI fuel system troubleshooting, and torque angle tightening specifications for heavy diesel technicians and generator mechanics.
Perkins 2500 Series (15.2L) General Engine Specifications
| Parameter | Specification (Metric) | Specification (Imperial) |
|---|---|---|
| Configuration | 6-Cylinder Inline, 4-Stroke, Heavy Duty Diesel, Direct Injection | |
| Bore & Stroke | 137.0 mm x 171.0 mm | 5.39 in x 6.73 in |
| Displacement | 15.2 Litres | 927.5 cu in |
| Aspiration | Turbocharged & Air-to-Air Charge Cooled | |
| Firing Order | 1 – 5 – 3 – 6 – 2 – 4 | |
| Compression Ratio | 16.0:1 | |
| Inlet Valve Lash (Cold) | 0.38 mm ± 0.08 mm | 0.015 in ± 0.003 in |
| Exhaust Valve Lash (Cold) | 0.76 mm ± 0.08 mm | 0.030 in ± 0.003 in |
| Oil System Capacity (with filter) | 62.0 Litres | 16.38 US Gal |
Perkins 2500 Series Tightening Torques & Angle Steps
Follow strict torque-plus-angle protocols using a calibrated torque wrench and angle indicator:
| Fastener Position | Initial Torque | Intermediate / Angle Procedure |
|---|---|---|
| Cylinder Head Bolts (M18) | 170 Nm (125 lbf·ft) | Retorque all bolts to 170 Nm, then advance +120° ± 5° |
| Connecting Rod Bearing Bolts | 90 Nm (66 lbf·ft) | Turn bolts clockwise +90° ± 5° |
| Main Bearing Cap Bolts | 160 Nm (118 lbf·ft) | Turn bolts clockwise +90° ± 5° |
| Flywheel to Crankshaft Bolts | 280 Nm (207 lbf·ft) | Tighten in star cross pattern in two stages |
| Rocker Arm Shaft Bolts | 115 Nm (85 lbf·ft) | Tighten bolts 1 to 6 progressively from center outwards |
| MEUI Injector Adjustment Screw | 8 Nm (71 lbf·in) | Turn adjustment screw clockwise 180° (preload), tighten locknut to 55 Nm |
Interactive Diesel Rebuild Tools
Check real-time bolt conversions and diesel diagnostic limits using our online Engineering Calculators Suite.
The Perkins 2500 Series (2506A-E15TA, 2506C-E15TA, 2506D-E15TA, 2506F-E15TA & 2506J-E15TA) is a 15.2-liter (928 cu. in.) 6-cylinder turbocharged air-to-air aftercooled heavy-duty diesel engine designed for 450–650 kVA prime and standby power generation and industrial plant applications. This official manual covers complete preventive maintenance schedules, cylinder head and main bearing torque-angle sequences, MEUI electronic unit injector height settings, and ECM troubleshooting.
1. Perkins 2506 Series (15.2L E15TA) Overhaul & Torque Specifications
| Component / Parameter | Perkins 2506 Series (15.2L) Factory Specification |
|---|---|
| Engine Models Covered | Perkins 2506A-E15TA, 2506C-E15TA, 2506D-E15TA, 2506F-E15TA, 2506J-E15TA, 2506EA-E15TA |
| Bore x Stroke & Displacement | 137.0 mm x 171.0 mm (5.39 in. x 6.73 in.) • 15.2 Liters (15,200 cc) |
| Firing Order & Compression Ratio | Firing Order: 1–5–3–6–2–4 • Compression Ratio: 16.0:1 |
| Cylinder Head Bolt Torque (M16/M18) | Step 1: 170 ± 20 Nm • Step 2: Retighten to 260 ± 14 Nm • Step 3: Turn +90° angle |
| Main Bearing Cap Bolt Torque | Step 1: 258 ± 14 Nm (190 ft-lbs) • Step 2: Turn +120° ± 5° angle |
| Connecting Rod Bolt Torque | Step 1: 130 ± 7 Nm (95 ft-lbs) • Step 2: Turn +60° ± 5° angle |
| MEUI Unit Injector Timing Height | 78.0 ± 0.2 mm (3.07 in.) • Injector Clamp Bolt: 55 ± 7 Nm (41 ft-lbs) |
| Intake & Exhaust Valve Clearance (Cold) | Intake: 0.38 ± 0.08 mm (0.015 in.) • Exhaust: 0.76 ± 0.08 mm (0.030 in.) |
| Cylinder Liner Projection Above Deck | 0.060 to 0.180 mm (0.0024 to 0.0071 in.) — Max variation between adjacent liners: 0.05 mm |
| Fluid Capacities | Engine Oil Pan: 62.0 Liters (15W-40 CI-4/CJ-4) • Total Cooling System: 58.0 Liters |
2. Critical Service & Cylinder Liner Projection Notes
During an in-frame overhaul of the Perkins 2506-E15TA engine, always measure wet cylinder liner flange projection at four points (90° apart) around each clamped liner before installing the cylinder head. Use our Cylinder Liner Protrusion Shimming Calculator & Torque Converter →








Reviews
There are no reviews yet.