Description
BoardPrg3 is a software tool that allows configuration of SICES controllers from your PC. It’s designed for use by qualified personnel with specific expertise in the use and installation of emergency gensets and, in some cases, parallel applications.
You can define the communication parameters between the PC and your controller, protect the controller with an access code or password, and upload a previously saved file to recover a configuration. All data and parameters can be printed directly from this configuration tool.
Please note that before using the software, it’s necessary to read the user manual of the device to be configured carefully
Capable AMF and Autostart genset controller with 3 phase (RMS) mains voltages and 3 phase (RMS) generator voltages and currents monitoring. Integrated J1939 Canbus interface to electronic engines, and traditional interface for non-electronic engines.
Sices GC315 is suited for managing the most common three-phases generator applications (Single Prime Mover and Single Stand-by gensets).
Extensive input and output capability with optional communication interfaces (Plus and Link 5G ready versions), make this an extremely powerful single genset controller.
The adjustable parameters of the controller allow the use of this device for standard and customized tasks, can be directly set with the controller’s keyboard, or using the free software tool (BoardPrg3), available on SICES’ Website.
A version with built in GPRS/GPS tracking (GC315Link 5G) is particularly suited for mobile or rental applications, where asset tracking and monitoring is required.
Sices GC315 , in all versions, is able to measure the mains frequency and compute the mains power, also when the load is connected to the mains itself. It’s also able to measure the neutral of mains and generator voltages.
Main features
- Remote control systems.
- True RMS readings on mains voltages and on generator voltages and currents. Neutral measure included.
- Active, reactive and apparent power measurements.
- Frequency and power measurement on mains input.
- Engine speed measurement by frequency, pick-up or W.
- 8 programmable inputs and 8 programmable outputs.
- Additional current measurement for neutral or ground fault protection (50N + 64).
- Graphic display with self or manual adjustable contrast based on theb temperature.
- Insulated and auto-supplied J1939 and MTU MDEC CAN interface.
- USB interface with MODBUS RTU protocol.
- RS232 serial port with MODBUS RTU protocol.
- RS485 insulated serial port with MODBUS RTU protocol.
- Ethernet interface with MODBUS TCP protocol.
- GPRS Modem.
- Possible connection to the software SIMONE.
- Real Time Clock with rechargeable battery.
- Events and data recording.
- Free monitoring tool SicesSupervisor3.
EMBEDDED FUNCTIONS
- Engine diagnostic codes.
- Real Time Clock with internal rechargeable lithium battery.
- Periodical test.
- Hours counter for the maintenance schedule.
- Starter counters with delays cranks counters.
- Daily counter with embedded calendar for the maintenance.
- Smart weekly and monthly calendar for selecting specific days of the year.
- Configurable automatic daylight save time.
- AND/OR logics and configurable TIMERS.
- Remote start and stop.
- 126 Events log.
- Fuel pump management.
- Pre-glow and coolant heater management.
- Embedded alarm horn.
- Possibility of graphic customization with low costs.
- Programmable via PC or controller’s keyboard.
- Remote firmware update.
- SMS communication.
- NTP, DHCP and DNS.
- N. 1 threshold as load shedding.
Reviews
There are no reviews yet.